Most new cars and 4WDs come with steel wheels because they’re cheaper, but many car makers are recognizing customers’ demand for mags—and they’re either fitting them to new cars or offering them as a cost-added upgrade. Read on to learn how mag wheels Brisbane can improve various characteristics of your vehicle.
Decreased Unsprung Weight
The biggest positive of mags is that they lower the wheels’ unsprung weight. Here, “unsprung weight” covers everything connected to the car’s wheels, and it includes the tyre, the wheel, brake parts, bearings, spindles, and parts of the suspension. Unsprung weight should be kept low to maintain contact with the surface of the road. By cutting weight, suspension components can react to road imperfections quickly, and traction is kept.
Other Weighty Factors
One thing you should keep in mind is that wheels are moving parts and they build inertia—so weight is more important here than it would be with stationary parts such as axles. The heavier a part is, the more effort is required to speed it up and slow it down. By using mag wheels Brisbane, you can lower the energy required to start and stop. The vehicle’s overall weight will be lowered, resulting in improvements in fuel economy, braking and acceleration.
Brake Parts Performance
As said previously, reduced vehicle and wheel weight can help brakes do their job better—but weight isn’t the only factor. Mags can dissipate brake heat more effectively than steelies, due to their composition and construction. Mags have additional slots that allow air to flow over larger surface areas. With increased brake performance, you’ll have a lower chance of brake failure and your brakes will last longer.
By choosing mag wheels Brisbane, you’ll enjoy greater choices in tyre fitment; you can buy falken tyres low-profile or wider tyres to change the look and characteristics of your vehicle. These tyres carry certain benefits, such as increased steering response, better cornering, less rolling resistance and fuel consumption, and better stability when braking.
Disadvantages of Mag Wheels in Brisbane
Mags and alloys have tremendous advantages, but there are still downsides to consider. These wheels must be washed regularly to keep their shiny finish, and you’ll have to be picky when selecting cleaners as certain chemicals can damage the coating.
You’ll have to park more carefully as well—after all, it doesn’t make much sense to spend hundreds on alloys only to damage them by hitting a curb. Ride comfort may be diminished, especially if you’re using low-profile tyres as well.
There are many reasons to buy mags for your car or 4WD. The initial investment may be high, but depending on your choice, you may end up saving in the long term due to better fuel economy and longer brake life. However, if you’re considering such a purchase, it’s likely that you want to show your wheels off to your best mates. The information given here can help you make the right choice, and it can help you justify the purchase.
Finding the right set of alloy rims for your car can be quite a challenge if you have no clue where to start. Alloy wheels are available across most car accessory dealers and individual retailers nowadays, and they are spread across numerous designs, sizes and price brackets.
There are certain points to be kept in mind, before settling down for a pair of wheels, and the list includes the right dimensions, tyre sizes, quality of the product and price, etc. The wheels need to be of just the right dimension, if you plan on fitting it to your vehicle. While larger rims won’t it, smaller rims will affect the balance and aesthetic beauty of the car.
Grab the Right Set of Alloys for Your Ride:
Most enthusiasts opt for larger alloys, since they generally uplift the masculinity of a car. Special provisions are often made to accommodate such changes and any reputed mod-shop can get the job done for a premium price.
However, if you have such plans for your ride, make sure that the engineer has sufficient reputation and experience in such work, since accommodating the larger wheels require major modifications to the suspension, chassis and the other related components.
There have been numerous cases of car mods gone wrong. Try not to be the next case on the list! Simmons wheels are a reputed brand in the mag wheel industry, although, there are several other competing brands that are just as popular. Simmons wheels has managed to carve a special niche out for themselves, thanks to their high-quality products and backup!
Why Choose Alloys Over the Conventional Steel Rims?
Alloys have a certain edge to their metallic composition, which enhances the performance aspect of a vehicle. These were hence introduced in the professional racing circuit, before finding their way into the mass market.
Alloys can be of several metals, although, aluminium alloys are the most popular. Introduced as mag wheels back in the 60s-70s, mag wheels of magnesium wheels gained instant popularity. These were light weight alloys that improved acceleration, top speed, handling and agility of a vehicle.
The Advantages of Magnesium Alloys:
Mag wheels improved braking, ride comfort and balance too. However, they ignited quickly in case of an accident and were difficult to put out. As a result, magnesium was quickly replaced with aluminium, which sports similar features, but does not ignite as quickly.
Hence, the modern mag wheels that are available across the different markets, are nothing but aluminium alloys. Hence, if you are looking for ways to uplift the aesthetics of your ride, what better way to do it than by grabbing a fresh pair of alloys. Modern mag wheels come in various shapes, designs and colour combinations. Hence, you are bound to find something that you are looking for.
Just make it a point to keep in mind the overall look and feel of your ride and you should do just fine.
Throughout you driving career, you will need to acquire the services of wheels and tyre retailers located all around the country. Presently, wheels and tyre retailers offer many kinds of exciting services which are related to your vehicle.
Wheels and tyre packages are abundant these days and you can choose one for your car that suits it the best. Always try to get it done all at once and in one place in order save further costs and recurring expenses over time. Furthermore, you can check out alloy wheels which are available in various sizes like 13, 15, 17, 18, 19, 20 and 22 inches.
Purchasing the perfect set
When you are purchasing a set of Wheels and tyre packages, take a look at the various kinds of brands available in the market. You can choose among various kinds of top tyre brands like Toyo, Nexen, Continental, Goodyear, Michelin, Pirelli, Dunlop and more.
You will find that alloy wheels are available in different shapes and custom designs that should truly bless the look and attraction quotient of your vehicle. However, when buying alloy wheels, knowing about the ways to get them repaired is a must.
Knowing about wheel repairs
Before starting any kind of alloy wheel repairs, always go for a close examination and check out everything about the wheels. If you straighten up the wheel, it will correct any kind of side to side wobble and at the same time, and half of the damage caused to your wheels will be compensated by that.
At the same time, the chrome can be removed in case it is bent. However, there could be cracks under the chrome which needs to be checked. In that case, the chrome needs to be ground out and also re-welded. A proper inspection should root out any kinds of finishing defects, scratches, scuffs and also any kind of poor paint jobs.
When you are about to repair your alloy wheels, you should keep all the original cast markings that were displayed by the manufacturer. This makes sure that the medium which was used to strip the wheels which necessitate re-finishing does not end up roughing up the surface and removing some of the metal.
Usage of the correct materials
Commonly, you will notice that metal oxide and steel shots are used however, using an acrylic medium which is similar to sand is useful as well. The former process is quicker and cheaper but it is recommended to proceed carefully, since you do not want to damage the surface.
Meanwhile, there are cases when you are a bit too nitpicky and protective of your alloy wheels. Constant vigilance is great but it always depends on the mechanic as to what kind of changes need to be done.
He will know all the kinds of re-machining or re-painting or any type of re-polishing that needs to be done on the wheels in order to make them new again. When you are in doubt, always seek the advice of a wheel repair specialist. When you buy cheap tyres for your car, try keeping a balance between quality and price.
When you are planning to buy a car, you will be flooded with tons of information – some of which are useful, while most of which would be waste. You will come across terms like torque, fuel consumption, engine capacity, differential, 4×4 wheels and many techier terms, that you could care less about.
Some of these terms will be easy to understand and self-explanatory, whereas some terms will require you to have some technical know-how of how a car works. For example – 4×4 Wheels?
Now, what do you understand by the term 4×4 Wheels?
In simple terminology, 4×4 Wheels means that the car receives power to all 4 wheels at the same time, instead of just two wheels (standard cars). If you still do not understand, it is fine. We will be getting into the depths of 4×4 Wheels in the article.
There are three ways in which a car may work:
- Power goes to the front two wheels and it pulls the car along
- Power goes to the back two wheels and it pushes the car along
- Or, power goes to all the 4 wheels (4×4 Wheels) and the car moves along
Point number 1 and 2 are called 2×4 Wheel Drives, whereas point number 3, is called – you guessed it right – 4×4 drives.
As you may have already anticipated, the first number is used to denote the number of wheels that the car’s engine powers. Whereas the last number is used to denote the number of wheels the car has.
4×4 Wheel drives are mostly preferred for off-road driving because the equal allocation of power in all the wheels allows the car to be able to get it out of mud holes and cracks, without needing any push or pull assistance. Should the car ever find itself in trouble, it can use the set of “untroubled” wheels to push or pull its way out of the situation.
Added advantage of 4×4 Wheels:
With 4×4 Wheels, you are not dependent on a single pair of wheels to get traction. Your car grips the surface with a wider area of michelin tyres, which gives it more stability. Especially on slippery surface, you can pull the car away effortlessly with the extra set of powered wheels.
Another term that is frequented with the term 4×4 is “Torque.” Torque signifies the low down grunt power of a ride. A car with more torque will be better at pulling “heavy duty things” than a car, which has more HP (horsepower). Unlike Torque, which impacts the pulling capacity of a vehicle, Horsepower, impacts the top speed.
So, your decision to purchase a car will completely depend on the purpose you plan to use the car for. For city or town driving, you could do great with a 2×4 wheel drive. But, if you are planning to go on off-road expeditions or cross-country journeys – 4×4 wheels will be your best friend.
Hope you found this article helpful. Do remember to leave your feedback in the comments section below.
Buying tyres can be a daunting task if you’re unaware of the requirements of your vehicle. If that wasn’t confusing enough at the retailer scale, imagine buying wholesale tyres! They are cheap and are usually covered by warranty. However, they might not be of the same quality that you are seeking!
Factors to Keep in Mind While Looking for Wholesale Tyres:
I suggest you look out for three credibility factors for every brand while searching for a new set of shoes for your ride.
You must take into account the manufacturer’s reputation, selling price of the tyre, and the quality. Try to run a background check on the manufacturer before taking the plunge. An effective way of doing this is reading online, or surfing through the forums. You could also ask a colleague or relative for their past experiences with the brand. Nothing beats first-hand experience!
Retail vs. Wholesale:
You should make it a point to visit multiple dealerships and compare the quality of the products and the price point of the numerous packages that are on offer. This way you have a higher chance of cutting the best deal. Wholesale tyre prices are not, however, your primary concern, as you run the risk of being fed duplicate products while looking for cheap alternatives.
If you cannot distinguish between genuine products from a fake, employ the services of a professional who can! If you’re looking at wholesale tyres online, chances are that you plan on selling them at retail rates. If you regularly stock and sell, you might want to tie up with a wholesaler and receive added benefits such as credit, seasonal discounts and certified original products. These benefits can be further passed on to the customers, who in turn will refer friends and family.
Hence, earning the trust and building your reputation is what matters initially. Your long-term goal should be maintaining that reputation and upholding the trust of your existing customers.
So now that you know what’s important to look out for, you can safely shop with confidence for when you want to buy tyres at wholesale stores. Just always check the company’s reputation online and deal with tyre companies with good Google plus reviews and good rating on local rating sites.